Analisis Efisiensi pada Lampu Movement Area Guidance Sign (MAGS) di Bandar Udara Internasional I Gusti Ngurah Rai - Bali
DOI:
https://doi.org/10.61510/skyeast.v1i2.15Keywords:
airport, Constant Current Regulator (CCR), efficiency, Movement Area Guidance Sign (MAGS)Abstract
The Movement Area Guidance Sign (MAGS) is a sign to provide information to the pilot in directing the movement of the aircraft during take-off, landing and taxiing (the road to the apron) efficiently and safely whose electrical power is supplied by a Constant Current Regulator (CCR). where the supply has a constant current and the network system is installed in series so that each lamp has the same brightness intensity. Bali's I Gusti Ngurah Rai International Airport is equipped with an Airfield Lightning System facility, a visual landing aid, one of which is the Movement Area Guidance Sign (MAGS) or better known as the Taxiway Guidance Sign. The MAGS lights at I Gusti Ngurah Rai International Airport Bali have 2 types of lights used, namely, 33 fluorescent type lights and 6 LED type boxes so that the total number of MAGS lights at the airport is 39 MAGS boxes. This research uses this type of research. qualitatively so that the analysis and calculation results show that LED lights are 57.94% more efficient than fluorescent TL lights at MAGS International Airport I Gusti Ngurah Rai. This is caused by the amount of power used by the lamp. In terms of quality, you may get more bang for your buck than your initial investment in MAGS LED lights. This is because LED lamps have a lifespan 3 times longer than fluorescent lamps and are brighter.
References
Bunahri, R. R. (2023). Factors Influencing Air Cargo Business : Business Plan and Strategy , Professional Human Resources , and Airlines ’ Performance. Journal of Accounting and Finance Management, 4(2), 220–226.
Desniyanti, T. N., & Hilal, R. F. (2022). Pengaruh Kualitas Pelayanan Dengan Menerapkan Protokol Kesehatan Covid-19 Terhadap Kepuasan Penumpang Maskapai Garuda Indonesia Di Bandar Udara Internasional I Gusti Ngurah. Jurnal Kewarganegaraan, 6(1), 2190–2205. http://journal.upy.ac.id/index.php/pkn/article/view/2950
Gusti, I. I., Rai, N., Purwandari, D. P., & Wijaya, G. C. (2023). Peranan Customer Service dalam Meningkatkan Kepuasan Konsumen Bandara. 14(3), 500–508.
Hayati, N., & Yulianto, E. (2021). Efektivitas Pelatihan Dalam Meningkatkan Kompetensi Sumber Daya Manusia. Journal Civics & Social Studies, 5(1), 98–115. https://doi.org/10.31980/civicos.v5i1.958
Herlina, E., Tukiran, M., Yusnita, N., Hermansyah, H., & Andrianto, M. T. (2022). Peran Pengembangan Sumber Daya Manusia Sebagai Agen Perubahan. Jurnal Sosial Teknologi, 2(6), 487–497. https://doi.org/10.59188/jurnalsostech.v2i6.346
Himawan, A., & Haryudo, S. I. (2019). Aplikasi Arduino Pada Prototipe Pengendalian Sistem Instalasi Peenerangan Satu Fasa Berbasis Andoird Dengan Menggunakan Jaringan Lan. Jurnal Teknik Elektro, 08, 269–275. http://www.electronics-lab.com/project/4-
Indah, N., Jurusan, S., Penerbangan, K., Penerbangan, K., Surabaya, P., & Jemur Andayani, J. (2020). Optimalisasi Fasilitas Airfield Lighting System Sebagai Penunjang Pelayanan Navigasi Dan Keselamatan Penerbangan Di Bandar Udara Tambolaka. Seminar Nasional Inovasi Teknologi Penerbangan (SNITP), 1–9.
Liony, K., Paramahamsa, M., & Sari, A. N. (2022). Studi Perencanaan Perkerasan Runway dan Taxiway dengan Metode Federal Aviation Administration. 02, 67–74. https://doi.org/10.52989/jaet.v2i2.56
Mahesa, A., Samanhudi, A., & Indonesia, P. P. (2022). Taxiway Guidance Sign Jenis Mandatory Instruction Sign Taxiway Guidance Sign Types of Mandatory Instruction. 5, 101–108.
Muhammad Masykur, T. M. H. (2017). Perancangan Prototip Lampu Emergency Berbasis Light Emitting Diode Dengan Produk Light Emitting Diode Yang Beredar Di Pasaran. 8(2), 8–12.
Ngurah, I. G., Hermawan, W., & Widyastuti, D. D. (2020). Peranan Apron Movement Control Dalam Melayani Pergerakan Pesawat Udara Charter Di Bandara Halim Perdanakusuma. Sekolah Tinggi Penerbangan AVIASI.
Palaloi, S., & Nurdiana, E. (2018). Pengujian Dan Analisis Kinerja Lampu Tl Led Untuk Pencahayaan Umum Testing and Analysis of Performance LED Tubular Lamp for General Lighting. 77–84.
Partaonan. (2019). Analisa Penambahan Trafo Sisip Sisi Distribusi 20 Kv Mengurangi Beban Overload Dan Jutah Tegangan Pada Trafo Bl 11 Rayon Tanah Jawa Dengan Simulasi Etab 12.6.0. RELE (Rekayasa Elektrikal Dan Energi) : Jurnal Teknik Elektro, 1(2), 62–69. https://doi.org/10.30596/rele.v1i2.3002
Purwanto, H., & Sunandar, A. (2019). Analisa Perencanaan Runway , Taxiway , Dan Badaruddin Ii Palembang Menggunakan Metode Faa ( Federal Aviation Administration ). 4, 21–30.
Royhan, M. (2020). Pemasangan Lampu penerangan di Ruang dengan Sensor Passive Infrared Receiver (PIR) terintegrasi Arduino. Journal of Informatics and Communication Technology (JICT), 2(2), 8–16. https://doi.org/10.52661/j_ict.v2i2.54
Saputri, R., & Andayani, N. R. (2018). Pengaruh Kepemimpinan Dan Motivasi Kerja Terhadap Kinerja Pegawai Pada Departemen Production Di Pt Cladtek Bi-Metal Manufacturing Batam. Journal of Applied Business Administration, 2(2), 307–316. https://doi.org/10.30871/jaba.v2i2.1109
Siburian, J., Bondar, I., Hutauruk, N., Togatorop, D., Agung, U. D., Back, A., & Power, U. (2021). Studi Perencanaan Instalasi Sumber Daya Cadangan Sebagai Rangkaian Kontrol- Charger. 10(September), 68–79.
Suwarsono, S. (2016). Pengantar Penelitian Kualitatif. Hari Studi Dosen Program Studi Pendidikan Matematika, 1.
Yaremchuk, Y. E., Katayev, V. S., & Sinyugin, V. V. (2015). Rancangan Simulasi Appraoch Lighting System Bandar Udara Menggunakan Microsoft Visual Studio 2015 Di Sekolah Tinggi Penerbangan Indonesia. Реєстрація, Зберігання І Обробка Даних, 17(3), 56–64. https://doi.org/10.35681/1560-9189.2015.17.3.100328
Yusuf, I., Supratno, S., & Samsiana, S. (2019). Konservasi Penggunaan Energi Lampu LED DTUSI Kasus Di Ruang Office PT. KDS Indonesia. Seminar Nasional Edusainstek FMIPA UNIMUS 2019, 239–253.
